Idaho Washburn Gas Regulator and Meter Guard by Washburn LLC $49-$69

Additional information

$69.00

View Cart

 

Product description

The Washburn Gas Regulator and Meter Guard is a sheet metal, fabricated hood or guard designed for exterior placement over gas regulators and gas meters for the purpose of providing enhanced protection from damage due to ice and snow.

The unit is 10 inches wide by 12 inches  tall by 8 inches deep, and is made by hand in Saint Anthony, Idaho by Clint Washburn of Washburn LLC. 

The “face” of the guard that is exposed to the elements is 10 inches by 10 inches and can accommodate the graphics of the propane marketer.   Decals are available as an option or can be sourced from the propane marketer’s existing sticker vendor.

The item is constructed by hand of 20 gauge galvanized steel. 1 inch flanges on the top and sides are for mounting to the building exterior and structural creases are strategically placed into the unit to add strength. Approximate weight per unit is 2 lbs 3oz.

          

     

Large quantities will be shipped in boxes of 10. Each box is 24.5 lbs, and 24” x 14” x 9”.

Smaller quantities will be shipped in boxes that will still be 14” x 9” and the length will be 12” for 1 and an additional inch for each additional unit.

Each one weighs approximately 2lbs, 3oz.

Purchases will be shown as “Washburn LLC” on your debit and credit card.

Sales Tax – as of January 2021, neither VPE or Idaho Washburn are assessing or collecting state sales tax for units sold.  If you are buying guards for a use where sales tax does apply, ie not for resale, you are responsible for the sales tax applicable to your taxing jurisdiction.

Purchase using PayPal, Mastercard and Visa.

Purchase orders accepted from established propane retailers or others with pre-approval only.   Email Clint at [email protected] for pre- approvals.

Please allow 7  days for processing and shipping.

The cost and options for expedited shipping – if needed – will be shown at checkout.

Sold exclusively online at www.virtualpropanestore.com

See the Washburn LLC virtual booth at www.virtualpropanestore.com

FAQs

  • Q: How is the guard mounted to the building? 
    • A: Using the flanges on the top and sides of the guard, the installer will use appropriate fasteners for the exterior of the structure being mounted to. Flanges will need holes drilled to match the fasteners used.
  • Q: Are custom sized or painted guards available? 

Questions may be directed to Clint Washburn at [email protected]

 

NOTICE AND DISCLAIMER CONCERNING LIABILITY

The recommendations, standards, or recommended practices, as reflected in the referenced PERC documents were developed by independent consultants retained by PERC. While PERC administers the process of obtaining the information, it does not independently test or verify the accuracy of the information or methods used to collect the data that supports the conclusions or recommendations reflected in this document. PERC, NPGA, GPA, and the industry members disclaim any and all liability for any personal injury, property damage, business losses, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use, or reliance on this document, or any information, apparatus, method, process, or similar item disclosed in this document. This disclaimer of liability shall apply even if such loss or damage results, in whole or in part, from any acts or omissions of or by any negligence on the part of PERC, NPGA, GPA, the industry members, or any persons who contributed to the development of the information contained in this document.

PERC, NPGA, GPA, and the industry members make no warranty or guarantee as to the accuracy or completeness of any information published in the 2019 Cylinder Requalification document.

Text and code references found in that document are based on the 2017 edition of NFPA 58: Liquefied Petroleum Gas Code. The procedures and information in this document are intended to implement the standards set forth in the documents referenced with capabilities of the personnel and equipment available. It does not create new standards or criteria for compliance. The order of steps in any procedure may or may not be of importance. This material is not sold nor is it a product of any consulting or engineering activity.

Users of this document should consult the law of their individual jurisdictions for codes, standards, and legal requirements applicable to them. This document is not intended nor should it be construed to (1) set forth policies or procedures that are the general custom or practice in the propane industry; (2) to establish the legal standards of care owed by propane distributors to their customers; or (3) to prevent the user from using different methods to implement applicable codes, standards, or legal requirements.

By disseminating or publishing this document, PERC is not undertaking to render any professional or other service to or on behalf of any person or entity. PERC, NPGA, GPA, and the industry members are not undertaking to perform any duty owed by any person or entity to any third party. Anyone reading or using this document should rely on his or her own judgment or, as appropriate, should seek the advice of a competent professional in determining the exercise of reasonable care in any and all circumstances.

    OSHA NFPA & DOT 8-Hour Propane Emergency Responders “Refresher” Training






      ON-LINE LIVE 3 Hour Propane Cylinder Inspection class